Surfboard Storage Rack NZ - TRIPLE wall rack for 3 surfboards - with Wooden 'Rough Cut' Base - by Surf Dogz
*these are the economy "rough n ready" version of the racks which are rough cut second grade timber with routed edges. they are fully assembled and ready for finishing to your taste.....
- surfboard wall storage rack for 3 surfboards or longboards
- rugged design suitable for up to 11kg (25lbs) per surfboard
- 48cm (19“) padded steel pegs with plastic end caps
- TBAcm (TBA”) high second grade douglas fir uprights
- pegs are 2cm (3/4″) diameter galvanized steel tube (no PVC sprinkler pipe or wooden dowels here!)
- spaced at 20cm (8″) centre to centre (tilted up 10 degrees)
- ships fully assembled with heavy duty mounting hardware and instructions (1/4” hex head lag screws – not just wood screws)
- weight TBAkg (TBAlb)
- hand crafted in Huntington Beach, USA
- ships FREE from New Zealand!
ROUGH 'N' READY - ROUGH CUT RACKS
High strength, low cost racks with the same strength and design excellence as the deluxe racks, for practical, safe SUP storage.
Surfdogz 'rough n ready' racks are designed to maximize practical board storage where the primary concerns are reliability and strength at a budget price. Surfdogz 'rough n ready' however, does not mean any compromise in strength. Each rack is designed to meet their twenty-five-inch-wide / twenty-five-pound-heavy criteria.
For those who prefer a fine, furniture-finished rack to accent your board collection, check out the Deluxe version here
THE HUNDRED POUND BOARD TEST
Each type of Surfdogz wall rack (Surfboard and SUP) is load tested with fifty pounds (22.5kg) of down force, on a single peg, twelve inches out from the base. This is the equivalent of a one hundred pound (45kg) surfboard at rest on the rack set. In all tests, deflection of the rack peg was insignificant with no permanent deformation or damage to the peg/base connection point. We don’t recommend trying this on any other brand of rack!
Q: How strong are Surfdogz Racks?
A: Our racks, both wood and polysteel (HDPE) base, are designed to support even the heaviest long boards and paddleboards. They match or surpass even the expensive metal racks on the market, and our racks will not rust or corrode.
Q: Which is better, Surfdogz wood or polysteel base?
A: Strength wise, they are comparable. Poplar has a warm oak stain finish, where polysteel (black) has a sleek, modern look, and has the advantage of being weather-proof. (HDPE racks are supplied with hot-dip galvanized fasteners, which will resist corrosion and rust for many years)
Q: How far apart should the racks be spaced?
A: We recommend skipping one wall stud (usually spaced at 16”) so that the racks end up 32” apart. This is just right for long or short boards.
Q: Why are there so many mounting screws on the polysteel (HDPE) racks?
A: In tests, the HDPE rack pegs tended to sag slightly under heavy load. The rack was not damaged, and returned to its original position when the load was removed.
By positioning a mounting bolt just above each peg this problem has been completely eliminated.
Q: What is HDPE?
A: High Density Polyethylene is a recycled thermo-plastic material made from reprocessed polyethylene containers, such as milk bottles. It is an extremely strong and heavy structural material that is impervious to moisture. It contains no organic fillers, like wood chips, as do cheaper “plastic lumber” materials. California uses HDPE to construct picnic benches at state beaches and parks. We would definitely recommend HDPE over Wood for usage outdoors.
As a family business with roots in the Huntington Beach, California surfing culture (reaching back to before World War II), Surfdogz have filled a niche in the board sports market for strong, reliable, and reasonably priced surfboard wall racks for over ten years. Four years ago they expanded their line to include SUP wall racks. Of course each rack is hand crafted in their own California shop.
Free Shipping on Orders Over $30!
If you live in New Zealand you get FREE SHIPPING for any order product value over $30!
This includes our entire boardbag range - Boost 20mm single travel surfboard bags, Superslim multi 1-2 day surfboard bags, Overstayer multi 1-3 travel surfboard bags, and SUP travel bags, all ship FREE.
Plus any product, or combination of products, valued at over $30 all ship for FREE.
Stoke on that !! 🤙🤙
For any questions please email email@example.com
Order Processing & Delivery
Orders are processed within 24 hours of receipt. Shipping takes place on weekdays only, so orders received after midday on a Friday will normally ship on a Monday. Delivery times are 1-2 working days for North Island and 3-4 working days for South Island. Rural delivery may take an additional 1-2 days. If you need delivery quicker than these times please contact us for priority shipping.
If you have any queries about the status or progress of your order, for a same day response simply reply to either this email or firstname.lastname@example.org or phone us on 021 746 369